Enterprise WPA troubles

-

Two gadgets we've got recently refused to access the university wireless network. The reason is that WPA with an EPA-PEAP autentication server is used on UPV campus. The ASUS eeePC that comes with Xandros Linux does not support that. Alternatively I could use the eeePC built-in VPN to connect to a secondary wireless network, but again, that software did not work either.

The Nokia E71 cellphone does support WPA Enterprise, but contrary to other wifi setup that can be done on the fly, the so called WPA Enterprise is hidden down there in the system configuration menus.

The solution I took for the eeePC was quite radical as I installed eeeXubuntu. There is a special Xubuntu version that worked for me. You create a boot image on a USB flash dish to get it installed on the eeePC. One word of warning though: I you accept to install system updates, each new kernel update will break the Atheros wireless driver (it can be rebuilt later, but it's a manual process).

The solution for E71 was to ask our Computer Center helpdesk. Again, the process was documented on our web, but not very visible when searching unless you know in advance where to look.

Comments

sandy said…
can you please point me to the Instructions to connect the Nokia E 71 to an WPA enterprise network
Thanks In Advance
9:32 am
misan said…
You've got to go to Tools/Settings/Connection/Access points and then select the network you want to join. Then scroll down filling in all the different options. Please remember to install a digital certificate (if needed) and set the right EAP protocol (you may need to ask which one to use for your network).
10:00 am
Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Stepper motor step signal timing calculation

-
Image
While we use stepper motors in many devices, the timing of the step signals is not always well understood. Most of us can see how a fixed speed is a bad idea unless the speed of motion is really slow, but it is fixed speed what is really to generate with simple code. You just can use the Arduino Blink example to send a fixed frequency of pulses to a stepper motor driver. If too slow, just reduce the delay value. But for most real-life applications variable speed controls will perform better. These systems will speed up the motor to a given maximum speed and it will slow it down to stop at the desired step count. But understanding the math behind this process is sometimes not obvious. Let us start with the simple case of the so-called trapezoidal speed motion profile. Here motion takes place in three phases: acceleration, constant speed (cruising) and deceleration. But the point is how can our code create such a behavior. Stepper motor drivers usually accept two signals to control
Read more