Reanimating a PSS120


Our old Philips MP3 clock died last week. It no longer works or starts up. In the past I was able to reset the unit to get it back to life, but this time the trick didn't do it. After reading on the net I saw many customers had to return their units with a similar problem, I guess there is a not so weird condition that reset does not cure.

I managed to open the unit without breaking it and I checked the battery that seemed ok. After unplugging and plugging back the battery the unit was working again. You will need the right screwdriver for the task as it has many small screws.

Comments

Popular posts from this blog

VFD control with Arduino using RS485 link

How to get sinusoidal s-curve for a stepper motor

Stepper motor step signal timing calculation