The beauty of RFC-2217

-

Recently, I was involved in a development where remote access to a serial port was required. I was doing my development with a Rabbit core and I needed to get Internet access to a serial device and to simulate a serial port on the host PC. I learned that you could use RFC-2217 which is an extension to the telnet protocol. I went to nabble to get some help but I found out nobody seemed knowledgeable about that protocol. So I did my job, and when I got it running I wrote an article for an engineers magazine. Once I get the "go" from the editor I'll let you know where it is published.
I used with quite success Fabula Tech's Serial Port Redirector which is RFC-2217 compatible, but it is not free. For a free redirector you could use HW-group's Virtual Serial Port but be warned this latter software does not handle break signal generation. The same thing applies to Digi One SP device that, although the manufacturer claims it to be RFC-2217 compatible, it is not capable of generating arbitrary-length break signals over the serial port.

Comments

Hiroshi Ikeda said…
One day, I want to become you!!!!
12:57 pm
Unknown said…
Nice and helpful overview. Don't stop)
Also I used as terminal emulator Virtual Serial Port Driver (http://www.eltima.com/products/vspdxp/). It works perfect for me.
4:28 pm
Unknown said…
This comment has been removed by the author.
4:28 pm
Oliver said…
If there is still interest in options for remote access to COM ports https://serial-over-ethernet.com
8:50 am
Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more