My wife has got an iPad

-
I've been reluctant to give in to the latest Apple gizmo. I tried it out last week and it was ok. Web browsing was smooth and comfortable till you reach a flash based page (flash does not work out of the box). The best feature I noticed was that it dos not get hot. This is very nice when the weather is hot.

Writting tris entry using iPad keyboad proved not to be very convenient, as many words get replaced by others guessed by Safari to be what I want to write. Maybe it is causes by a mismatch between my localization and writing in English here. A simple post like this took me ten minutes and lots of backspace.

Comments

Josemanu said…
Si, es un aparatito muy interesante. Yo he jugueteado un poco con el y me ha gustado mucho, aunque la verdad, el precio me parece una exageración.
Perdona que no postee en ingles, pero se me da fatal el escribirlo. Leerlo es otra cosa, por ello sigo tu blog con mucho interes.
12:49 am
misan said…
Thanks Josemanu. I force myself to write in English but comments aré welcome in any language. Definitely using iPad foro Facebook or blogger in English while having Spanish keybard is not nice, as many suggestions are wrong.
5:38 pm
misan said…
Some of the typos of my previous message were self-inflicted (i.e: aré, foro)
6:55 pm
Rasmus Thielke said…
Hi Miguel,
did you find a solution to enable flash on the ipad?

Regards from Berlin,
Rasmus
12:47 pm
misan said…
@Rasmus: No, I have not figured out how to make Flash to work on iPad (I have not been trying hard, maybe there are some choices).

Of course, you can get Flash 10.1 to work on some Android tablets and phones.
4:21 pm
Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more