Trying to get some music ...

-

... into my old Creative DAP Jukebox in Ubuntu on my new machine revealed that USB ports were not working properly. Although they were recognized nothing much happened as if interrupts were not getting to the system, however network card, keyboard and mouse were working and are also interrupt based.

Rebooting the system with the "noapic" keyword as a boot option cured the USB problem. It confirms that it was somehow due to a bad routing of interrupts. I've added this my kernel boot line in /boot/grub/menu.lst to have it as default.

Unfortunately life is always challenging us and this fix of the USB did not solve my problem. Neither Gnomad2 2.8.1 nor Neutrino software were able to talk to my MP3 player (though I have successfully communicated with it and an Ubuntu-based laptop at home). Because I've just downloaded the latest version of Knoppix that my friend Victor Alonso kindly translates into Spanish. I decided to give it a go to see if it included newer versions of libraries and/or software, so I can get some music uploaded. Not being my lucky day Knoppix CD did not include any software for my MP3 jukebox. But "apt-get install gnomad2" did the trick and now finally was able to upload some music to my device. It is interesting to note that I used here Gnomad2 2.8.3-1, slightly newer than the one on Ubuntu 6.06. However, because Neutrino did not work either I guess that the libnjb5 could be the problem.

Next problem in the horizon was to get SuSE Linux 10.0 working on my new machine. Graphic card was not recognized and, even worse, sax2 froze my machine when trying to get the graphics configured. Finally I learned that I could force sax2 to use a given driver only. Although my card is an ATI Radeon, the radeon driver didn't work nor was the generic ati driver. So I resorted to the framebuffer driver that did work. However it only did it on 1024x768. No matter what resolution I were selecting on sax2, screen resolution was kept to 1024x768. Time to check the grub program documentation to see that frame buffer resolution is selected on boot with the parameter vga. So I rebooted with vga=794 to get 1280x1024 at 24bits color depth and now it works!

Almost there, but sound is not yet working on SuSE. The configuration with Yast did not work with the card. The system detects the device but it does not produce any sound. Fortunately, the command line alsaconfig allowed me to get the sound back.

I guess that with my latest posts you have been warned that this Asrock775Twins-HDTV card is not without some problems that are mostly fixable. Right now my 2.6 GHz processor is happily running at 3.3Ghz with the stock cooler. And my tests when encoding the MPEG video I posted some days ago with mencoder using 3 threads is peaking at 392 frames per second, I am really impressed with this result.

One last detail, this kernel bug seems to affect my system too. I haven't tried the patch proposed but I have disbled DMA in my CD-ROM and DVD. I can understand all these details can scare away people from using Linux: Folks, it is not always this way. Just try not to use cutting edge devices.

Comments

Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more