eBay experiences

-
A few days ago I bought one item from a seller on eBay. Seller looked good. But two days after I sent my payment I got an eBay warning message telling me the seller's account has been canceled and advising me not to send any money. Unfortunately the money was already sent so there was not much I could do.

Checking the seller's account feedback page revealed that the flow of feedback messages had stopped as users cannot leave feedback on a canceled account (not sure this is a good idea) even if buyers are already getting what they paid for (or a brick in a box). Let me elaborate on this: Blocking a seller account should prevent the seller to do "any more harm" (ie. to sell any new item) but the feedback information is useful mostly for buyers, so you are here punishing the buyers if they cannot post feedback for a blocked account.

Some days later my product arrived ok and I was surprised when I can see I can leave feedback for this seller. In fact, it seems the seller is back to business with the same userid. Maybe there was some sort of misunderstanding that was cleared out. Good for the seller I guess.

However I found pretty annoying that eBay failed to let me know this too. They were capable of warning me about a seller I was buying from who got his account locked, but they failed to tell me the same account was reinstated later. I am not happy with this behavior. To tell the truth I've got the feeling eBay is running downhill in customer service. I hope you do not have to deal with the silly automated answers they use to provide.

Comments

Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more