Using eBay's Best Offer feature

-
I'm still dealing with a non-responsive eBay seller after I've got burned by a non-working 8GB compact flash. I've seen that many people do not like to talk about this type of failures that happen on eBay from time to time. I'm still trying to get my money back from PayPal so maybe not everything is lost.

But now I wanted to buy some cheap control chips for bipolar stepper motors. Nothing fancy with micro stepping or digital current control, just a simple chip that can also be used for other purposes too. I saw this video and I learned about the L293. It is an old chip that several manufacturers mark as deprecated.

Instead of going to a local shop I went online to eBay and I saw several sellers have it available. I tend to favor European sellers if the price is right as I do not particularly enjoy periods longer than two months for delivery (something I've experienced first hand from Hong Kong lately). One of the sellers had a price that seemed ok, but they also did have the Best Offer button. As I was not in a hurry nor in serious need of that part I decided it was good moment to test that feature. Although I'm using eBay since 1999, I have never used the Best Offer feature before.

I've offered something around 60% of the asked price (or a 40% discount if you prefer) for four chips to see what happened. I thought that if the seller was not happy I might get closer to the asking price or I would just use the Pay Now. A few hours later I've got a reply telling me the seller had accepted my offer and the deal was done. I guess I will be paying more attention to this button in the future.

Comments

Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more