Open Citizen's Network

-

In my recent trip to northern Finland I had the opportunity to use a cool network service in the Oulu area: panOULU is an open wifi network you can freely.

Freely meaning several things: not only that you do not have to pay but also that you do not need any type of user ID, which is great if you happen to just be visiting the area for a few days.

Just opening your laptop and being able to use the network with the peace of mind it is not going to cost you an arm and a leg it's just great. I was able to upload the photos to my Picasa account so my family and friends could be updated. This same action would had been outrageously expensive should I were using the GPRS or 3G connection (getting the photos printed and sending them by a courier service is actually cheaper than your cellphone data service).

This week I've read that European regulators are asking the mobile operators to reduce users costs when using their mobile data services abroad. The point is that as far as the EC is about a Europe without borders, it does not seem to make any sense that we, European citizens, are being charged a lot more money when we use our cellphone on another European country than when using it at our home country.

Fortunately, most of the time I can wait till I get an inexpensive data connection when I am traveling so I do not have to face huge cellphone bills. Still, I've just fell in love of having free and open wifi access as a city-wide service. It is so convenient for travelers!!

By the way, I have to mention that I also selected the Oulu Scandic hotel (quite nice actually) because they offered free Internet access too. So my point here is that the same way as city planners think carefully about many other useful services to be deployed, like light poles or traffic lights, they might start thinking about how much value an open city wireless network may mean to visitors.

Of course, they fact that such a network might be used by some people to make VoIP calls may upset some cellphone operators (though some cellphones are actually equipped with Wifi just for this same purpose). But governments should be for pleasing citizens (voters) more than operators (campaign contributors?).

Comments

Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more