Two useful additions to your Iomega Screenplay pro HD

-
I've found the network transfers to take forever on this device. Between 1 and 2 Mbytes/second is really slow by todays standards. It means around 4GB per hour.

I'm happy with the torrent download functionality I mentioned on a previous entry but there is a catch: What if your download contains a sequence of RAR files? Yep, it happened to me with a 16GB download. Moving this back and forth to a PC would took more than 8 hours!!

So the obvious idea is ... why not to have unrar command on the SPP? And this is what I did. I looked for the source code, and using a buildroot ext2 image file I compiled unrar command. Now I can telnet to my box and launch it without the need of moving files back and forth. It's not lightspeed but it's minutes instead of hours.

The other improvement was to add SSH functionality by borrowing dropbear binary from OpenWRT project. Please have a look at dropbear documentation so you can install in properly on your system (a few files and links need to be created to get it working). It also includes SCP file transfers.

Comments

damaltor said…
Hi,

i want to reuse the binary of unrar for a argosy hv359t device, wich essentially is the same as the screenplay pro.

but i need the file wich is linked by "/lib/libuClibc++.so.0", because this lib is missing on the argosy device. coul you send it to me or better, upload it somewhere? that would be great. thanks in advance... =)

damaltor
9:34 pm
misan said…
I do not have that file in my system. But I have unrar working. You may want to try my binary.
10:50 pm
damaltor said…
ok.. tis binary actually wants the same file, libuclibc++.

i found a working uclibc++. both binaries do now unrar correctly, but dump the core after quitting.

well, better then nothing i guess :)
10:55 pm
misan said…
Yoy may want to use buildroot to create a development system for compiling using your target system. I did not have a lot luck using buildroot though. I guess the problem is your system has a different set of libraries thann mine.

Just in case you have not thought about it: You need the library file for your own architecture (it won't work the same file from a linux PC).

Good luck!
11:01 pm
damaltor said…
yes, i know that ;)

thi firmware for the two devices are exactly the same, there is only a very few files changed. the hardware is the same, too. the binary dows work now without core dump, but only when called with arguments. if i just call "unrar", it spits out usage info and then dumps core.
11:04 pm
misan said…
If it works with parameters, that's a start.

Without params it prints the help page, but it ends with

unrar: can't resolve symbol 'dl_iterate_phdr'
11:13 pm
damaltor said…
ok, here it ends with

terminate called after throwing an instance of 'i'
Aborted

well, thats fairly enough to work with... thanks a lot for your help :)
11:15 pm
Anonymous said…
This comment has been removed by the author.
7:51 pm
Anonymous said…
damaltor, hi!
How did you come up with screenplay firmware on your argosy device? i'm trying to find solution, but still nothing :( if helps, here's my adress contact @ r-s.lv
7:52 pm
damaltor said…
the actual screenplay firmware doesnt work on the argosy device. or better, it would probably work, but i havent found an easy way to flash it yet. you probably could extract the firmware image and write it directly to the disk, but i just left it with the argosy software. it is identical anyways. but i downloaded the screenplay skin from the screenplay wiki, and put it onto the argosy device. works nicely.
7:58 pm
Anonymous said…
One thing I even posted to Argosy's support email - FLAC playback. I have a huge collection of flac audio, that i would like to play on argosy. As mentioned in ScreenPlay model specs, it supports flacs :( Even, thank you for such a quick reply ;) Will try to somehow figure this out.
8:51 pm
Unknown said…
Hi Miguel Sánchez

It seems that I’m doing something wrong to try update the software on my ScreenPlay PRO HD

I’m using a MAC - OSX

ScreenPlay PRO HD
192.168.1.201
User name: ADMIN
Pasword: ADMIN

in TERMINAL :
sudo nmap -A 192.168.1.201
--> SMB active

FINDER | GO > CONNECT TO SERVER
smb://192.168.1.201

in TERMINAL :
/Volumes/ScreenPlay$ ls -als
total 4320
32 drwx------ 1 Alex staff 16K Sep 16 2014 ./
0 drwxr-xr-x@ 4 root wheel 136B Apr 24 09:36 ../
32 drwx------ 1 Alex staff 16K Jun 6 2014 .TemporaryItems/
2048 -rwx------ 1 Alex staff 296B Jun 6 2014 .apdisk*
32 drwx------ 1 Alex staff 16K Sep 21 2005 REC/
32 drwx------ 1 Alex staff 16K Mar 24 2010 RECYCLER/
32 drwx------ 1 Alex staff 16K Mar 24 2010 System Volume Information/
32 drwx------ 1 Alex staff 16K Mar 24 2010 back-up/
2048 -rwx------ 1 Alex staff 255K Apr 24 09:47 unrar (1)*
32 drwx------ 1 Alex staff 16K Apr 24 09:46 unrar 2/

on the TV screen by menu :
SYSTEEM > UPDATE SOFTWARE FROM HDD
results in FAIL


How did you install it???
10:35 am
Unknown said…
This comment has been removed by the author.
10:37 am
misan said…
It has been a long time since my ScreenPlay broke (or it was the power supply?).

My guess is that filenames with blanks may cause trouble. But please note I cannot check it on my side anymore.
10:47 am
Unknown said…
I gonna try it out, have nothing tho loose

thanks for your quick reaction
10:57 am
Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more