Building a mini i3 LC

-
The first Prusa i3 I built used a 6mm-thick acrylic frame. It worked ok, but when I saw sgraber's design I thought it will add a lot of rigidity to the acrylic frame. I later bought an aluminium frame and I forgot about the matter.

Recently I came across a local business laser cutting acrylic and I decided to give it a go with a similar but smaller design. One of the things I have observed about 3D printers is that they tend to be big. Having a large surface for the print area is nice because you can print big parts, but you pay the price of the printer being bulky.

As many of the things I print at home are small parts, I thought I would be a good idea to have a small printer at home and keep the larger ones for larger printers I might have at my office. Of course it is still to be seen whether things will work out this way or not.

So I ended up building this smaller sibling of my home Prusa i3.

These are the sizes of the rods I have used: 
  • X-axis: 2x265mm smooth rods
  • Y-axis: 2x270mm smooth rods, 2x290mm M8 rods, 3x130mm M8 rods, 1x210mm M8 rod.
  • Z-axis: 2x255mm smooth rods, 2x195mm M5 rods.
All smooth rods are 8mm diameter. 

I designed a bushing holder for this carriage to needs to be above the rods a bit more than usual.


With the compact extruder in the picture I get 100x120mm of print-head travel. I might change the extruder for a more compact one to get 120x120mm.

The frame seems rock-solid.

Comments

Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more