Banging my head with Java line separator

-
One of the most unpleasant experiences with computers is having to solve a problem you already fixed when you
realize the old solution is no longer working for reasons unknown.

The problem this morning was quite silly, actually. One piece of code created a text file. I did not care much about the way newlines were represented but when  I sent the file to to a colleague that uses Windows he complain notepad was making a mess out of it.

It was clear notepad was doing this because my file, created on a unix system, did not honor Windows end of line convention of CR plus LF characters (0x0d + 0x0a). I have solved that in the past just changing the System property called line.separator. You could do that with System.setProperty("line.separator","\r\n") but apparently not anymore. Of course, no error message or exception is raised, so you are left alone, in the dark, trying to figure out what is wrong and why what worked before does not work now.

I could not make much sense out of it, but I hate these changes that make me waste my time for no known good reason. It just seems the JVM ignores my changes to the property, still named the same way, for the same purpose. It vaguely mentions that a SecurityManager might be needed but I did not explore the problem further, I just learned that, without changing the code, I could use java -Dline.separator=$'\r\n' MyProgram to get it working with the new value for line separator property, so I did and got the problem solved, or almost all.

A few lines of my text file came from a configuration file that, again, did not follow Windows convention. So as I wanted to get the problem sorted out for all the lines and not only those generated from Java code, I had to figure out how to, easily, use vi to replace the LF end of lines by the real deal CR LR. I guess I did that once or twice years ago but I could not remember how to do it now. Long story short: %s/\n/\^M\r/g and please note that for obtaining ^M you need to press Ctrl+V and then Ctrl+M. I am thankful the backslash preceding ^M was mentioned in stackoverflow as its need was unclear to me.

A simpler way of getting a Windows-friendly text file from vi is to use the command :set fileformat=dos


Comments

Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more