Presentations' clock

-
I was recently invited by Pablo Murillo to give a talk at Zaragoza Maker Show and I wanted [among other things] to present a hands-on project to the audience, outlining the process I followed to get it done.

I was lucky my friend and fellow "Arduinist" Colin Dooley gave me away a 15-led addressable RGB stripe a while ago. Unfortunately, the Cylon effect (aka Lasrson scanner for those old enough) was already taken as one example from FastLED library, so I had to do something else.

I have chosen the title "Beyond Blink" for my talk, so it would be nice to get something that, while blinking, performed a more useful work. So what I decided was to use the 15-led stripe as some sort of presentations clock, that will help the speaker to know the time elapsed, a new led lit each minute, while of them is blinking each second.

But as many talks are longer than 15 minutes, I repeated the same pattern with changing colours for each next quarter. Red being the last color, since third quarter on. Talks should probably be no longer than 45 minutes anyway.

Later I thought that this contraption may also be of interest for the audience, so they too have some feedback on how time is passing during the talk, so I ended up placing it facing to the public during my talk.

I have made no effort on getting a very accurate time measurement, so I won't be surprised if is the thing is a bit off after half an hour, but if there is shift I assume it would be pretty small. Time starts ticking as soon as you plug it in. I used a USB port on the same laptop used for my presentation and I rushed to finish my talk during the allocated time frame. Looking at it instead of checking your watch during the talk looks likely better too.

I told the audience it would be my Christmas gift for them to post the code, so no matter you celebrate it or not you can grab it from here too.

Hardware-wise you just need three wires to connect the stripe to the Arduino, +5V, GND and data pin. I am using D9 pin as a data pin, but you may change it to any other pin you want. Please note you need FastLED library installed on you Arduino IDE or you get a compile error.  For a portable unit you can use an Arduino Pro Mini and a battery or a Nano or Pro Micro and a USB power bank.

Comments

Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more