Processing 3.5 on the RPi4 (with OpenCV and Kinect support)

-

Ten years ago I created with my friend Rubén Tortosa an art installation that would use a Kinect to capture the silhouette of a person standing in front of it. At the time, it was a PC running Ubuntu 10.10 and using Microsoft's Kinect camera. Microsoft wanted all of us to only use that camera with the Xbox game system. Thanks to the libfreenect library many of us did exactly the opposite. 

That piece has gone through several exhibits and it is now starting to cough up every now and then. So I wanted to check if the new Raspberry Pi 4 was a possible candidate for replacing the PC. 

I installed the 32-bit Jesse distro on a 16GB SD card and placed into my RPi4. I was able to install Processing on the Pi with this command-line: 

curl https://processing.org/download/install-arm.sh | sudo sh

The next step was to be able to use it, but as I was running a headless system, I could not rely on the local display. I am using Xvnc instead, so now I have a "virtual" screen I can access remotely using VNC. The only tool that worked fine with it was RealVNC (not Mac's finder cmd+K nor TightVNC worked for compatibility reasons). 

RealVNC asked me to create an account but once done it did not bug me more and it seems to work reliably. I do not know how secure the connection may be, but the fact that other VNC clients did not work makes me think that there might be there a security concern. 

Once the GUI was up and I could use my computer to remotely open Processing and run programs it became apparent that things were not going to be easy. I installed OpenCV and Open Kinect libraries for Processing but code examples did not work 😓

On the OpenCV front, it became apparent the downloaded library relied on libpng12 while the one on my system was libpng16. But luckily, the install of version 12 alongside was uneventful. Now, OpenCV examples are working.

Open Kinect was giving a NullPointer exception on the very first line, so it appeared the binary library loaded but it interacted poorly with the java binding. Somehow I ended up replacing it with a version 0.3a that worked nicely on the Pi. Of course, libfreenect needs to be installed first. 

The downgraded version of OpenKinect worked nicely with libreenect and so did all the code examples so I was finally in a position to migrate my old code.

I was using an old library for setting a Processing up to full-screen. Now that is obsoleted by the new fullScreen() command that substitutes the size() command on the setup() method. A few methods have changed in the Kinect front, but following the examples, it was easy to fix those too. 

The remaining problem was the absence of  the blobs() method on OpenCV. A bit of digging let me to what I believe is a newer implementation called findContours(). Once converted it still did not work. The reason being that contrary to the old blobs() method, findContours() does not give you the largest blob first. So now I find the largest contours looping through all of them and then pass that to the rest of the program. 

So finally the same old app is running happily in the RPi4, amazing.

Comments

Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Importing OpenSCAD designs into Onshape

-
Image
After using Onshape CAD software for a while I am really fond of it. So one natural thing to do, specially once they have released the Instructor's kit is to start using it in the classroom too. But one thing I was not so sure how to do was to use old designs I made using OpenSCAD. It does not mean I am completely quitting using OpenSCAD but suddenly I can see I can do assemblies in Onshape that will look quite nice for showing and documentation purposes if only I could easily import from OpenSCAD. I am glad to report that the route OpenSCAD --> FreeCAD --> Onshape worked brilliantly. Even more when a few tricks were applied. While some people suggest to import CSG files from OpenSCAD to FreeCAD, I have had more success by directly importing SCAD files into FreeCAD. One trick that worked well for me was to get rid of $fn references, so now circles become real circles (or cylinders) in FreeCAD. If a part keeps some $fn references then your cylinders or circles wi
Read more